News
Services
Dealers
Search
User
Contacts

AVIATION

LAND

MARINE

SYSTEMS

AMATEUR

IC-M400BB

×

Status message

For more information on this product please contact your nearest dealer
  • 25W output power
  • Class D DSC
  • Waterproof (IPX7)
  • Full dot-matrix LCD
  • Intuitive user interface with directional keypad and rotary selector
  • Active noise cancelling
  • 10W loud audio with public address and foghorn functions
    (external speaker required)
  • Black Box setup - full remote operation through HM195
  • MarineCommander and MA-500TR compatible
    (DSC and AIS functionality)
  • NMEA 0183 in/out
  • AquaQuake draining function on HM195
  • All 55 marine channels
  • Black and white HM195 units available

A No-Compromise, Space-Saving Marine VHF Radio

 

Space-Saving, Two-Piece Configuration

The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.

 

New Intuitive User Interface

The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.

 

Active Noise Cancelling

The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.

 

10W Loud Audio, Public Address and Foghorn

The IC-M400BB has a built-in 10W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.

 

Built-in Class D DSC

The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

 

Common NMEA Interface

When connected to an external GPS receiver, current position and time are shown on the Commandmic display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.

 

AIS Target Call with MA-500TR

When connected to the optional MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.

 

Other features

  • MarineCommander™ compatible
  • AquaQuake™ water draining function (HM-195B/SW)
  • IPX7 waterproof protection both for IC-M400BB and HM-195B/SW (1m depth for 30 minutes)
  • Dual/tri-watch function for monitoring Ch.16 and/or call channel
  • Priority and normal scan

 

COMMANDMIC, MarineCommander and AQUAQUAKE are trademarks of Icom Inc. (Japan). All other trademarks are the properties of their respective holders.